Soporte Intermedio

    88x4x8 C 57.1 E 30.2    for 23,8 x 61,2 mm u-joints Used in DIY simulation machines

150x4x12.7 C=95.2 E=38.1 for 34,9x126,1 mm u-joints ORIGINAL DANA SPICER

1410 SAE Ø130x4x11,2 C=69,85 Ød2=95,25 E=60

98.5x4x9.7 C=60.3 E=55-CR.30,1X92 ancl. 1300/1310 SAE

S.1310 SAE 98,5x4x9,7 ORIGINAL DANA SPICER

SERIES 1410 SAE 106x4x12,1 C=69.9 E=42,9 d2=95,27 ORIGINAL DANA SPICER

S.1410 SAE 104x4x12,2 C=70 E=45 d2=100 ORIGINAL DANA SPICER

150x4x12.7 C=95.2 E=50.8 FOR 34,9x126,1 mm U-JOINT ORIGINAL DANA SPICER

119x4x11.1 C=69.9 E=39.6 FOR 30,1x92 mm U-JOINT ORIGINAL DANA SPICER

C/C=67/67. Ø125,8/4-12,2. Ø65 M. d2=95. E=53.

SAE 1610 174x8x9.6 C=168.6 E=76

SAE 1800 203x12x11 C=196.8 E=76

FLANGE YOKE STANDARD SAE Ø98,5/4-9,7. MALE SPIGOT Ø60,3mm. ORIGINAL DANA SPICER. FOR DRIVESHAFT SPICER 1310 SERIES. TOP...